Plasctic Coat Matt

Description

ServFaces Plastic seam / matt effect

Technology for multiple surfaces. The transparent and high-strength surface coating of the servFaces series is a versatile and unique quality product. They provide optimal protection for untreated, natural plastic surfaces and create a silky matte effect!

Multitalent for surface optimization
High-transparency coatings form a durable, dirt-resistant and easily cleanable protective layer, even with minimal application. The plastic coating also has a high heat resistance up to +680 ° C. This does not adversely affect the surface burning properties. Do not remove the product with acids or strong chemical detergents. ServFaces Plastic Coat has integrated a special UV block and effectively protects untreated plastics from long-term balancing.

ServFaces Plastic Coat is very flexible to a layer thickness of 5 μm and, therefore, can not break or flake.

Factorial character
Our goal is to make good products that leave a good feeling. Therefore, we are looking for the best compatibility for people and the environment. ServFaces covers are food products after curing.

Features:

Opaque, invisible long-term coverage.

• Fluorinated and resistant to ultraviolet radiation.
• The effect against graffiti and protection from virtually all acids and bases, as well as from organic solvents
• Temperature resistance from -50 ° C – max. +680 ° C
• Resistant to chemicals
• Weatherproof
• non-flammable / corrosive
• Improved resistance to scratches
• Self-cleaning property
• Simple-Clean

Application:

The surface to be treated must be clean and free of grease. Suitable cleaners are the Ultima & Surface Cleaner Neutra surface cleaner. On smooth surfaces, you can apply and apply the product using our application and application fabric. After a short reaction time, max. 1 minute you can remove / polish the excess product with a microfibre cloth (special linen towels). Can also be used optimally during fine spraying. The ambient temperature should be between + 10 ° C and + 35 ° C for best results. After 120 minutes, the product is dried with dust.

It takes about 6-8 days to fully cure the product. (Depending on temperature and humidity)

After curing, the coating is resistant to acids, alkalis and solvents. (PH 2-13)

Important:

• after treatment, protect the surface for at least 18-24 hours before contamination and humidity.
• Total drying time: at room temperature about 6-8 days
• a separate drying can reduce the drying time by about 2-3 days

Application: 3 to 5 ml / m²
Drying: 18 to 24 hours at + 20 ° C
Operating temperature: + 10 ° C to + 25 ° C
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.

Protect from direct sunlight and frost
Storage temperature: + 10 ° C to + 25 ° C

During curing, the surface must not be friction-free.