ServFaces Special glass cleaner is a modern glass cleaner that is cooked on the basis of a kitchen stove that cleans the glass surface and provides colorless glass surfaces. Also suitable for plastic surfaces. It can be used universally and easily removes nicotine, fat and oil.

Scope of application:

• Glass facades
• Window
• Car disks
• Plastic discs
• Window frames
• Glastic
• Mirrors
• Acryglas

Characteristics:

• Without silicones
•  skin-friendly
• environmentally friendly
• Without stripes
•  highly concentrated
• Strong cleaning power
• economical cleaning

Application:

Spray the surface with a special glass cleaner and remove dirt with a microfiber cloth. In the case of heavy soiling, the special glass cleaner is to be used in order to better dissolve the contamination.

Breed:

Manual sprinkler: depending on dirt, min. 1:10 – max. 1: 100
(Recommended: 35-50 ml / 1 liter of distilled water)

Operating temperature: + 10 ° C to + 30 ° C
Storage and shelf life: at least 12 months at room temperature in sealed original containers.

Protect from sunlight and frost
Storage temperature: + 10 ° C to + 25 ° C

The post Special Glass Cleaner appeared first on Protectpro.

Anti Fog is a newly developed highly effective anti-fog and cleaning agent based on a hybrid polymer system. The molecular structure causes the individual molecules to form a direct chemical bond with the treated surface.

Thanks to this transparent and highly efficient fog-proof protective film, we get an intense and crystal-clear fog seal.

Application area:

Glass and mirror surfaces in the house
Wet spaces, for example. Wellness and sauna, swimming pools, mirror and glass surfaces, showers, baths and glass surfaces in the vehicle sector.

Features:

• The product prevents fogging of glass surfaces even in the case of large temperature fluctuations.
• Removes even stubborn dirt without residues and leaves free from cleanliness and clean surface.
• Without silicone
• Based on water
• Protection of 3-6 weeks

Quantity of application: from 5 ml to 10 ml per m²
Operating temperature: + 10 ° C to + 35 ° C
Weather resistance: after 4-6 hours
Cure time: 24 hours
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.

Protect from direct sunlight and frost
Storage temperature: + 10 ° C to + 25 ° C

The post Anti Fog appeared first on Protectpro.

Technology for multiple surfaces on airplanes. Transparent and high-strength surface coatings of the servFaces series are a diverse and unique quality product. They provide optimal protection for a wide range of applications.

Multitalent for surface optimization
High-transparency coatings form a durable, scratch and dirt resistant protective layer even with minimal application. Due to low use of the material, rigid coatings are particularly suitable for use in large areas. Therefore, damage from resins, acids, salts, weathering and mechanical influences is not a chance. Our high strength silicone hard coatings are also extremely heat resistant up to 1800 ° C. This does not adversely affect the characteristics of the fire on the surface.

Factorial character
Our goal is to make good products that leave a good feeling. Therefore, we are looking for the best compatibility for people and the environment. Our coatings are food products after curing.

Features:

• transparent, invisible, flexible and permanent long-term coverage
• without silicone, fluorine, teflon, wax, silicone and carcinogenic additives
• UV and weatherproof
• resistant to salt water
• The effect against graffiti and protection from virtually all acids and bases, as well as from organic solvents
• Temperature resistance from -50 ° C to +1800 ° C (depending on the composition)
• Resistant to chemicals
• non-flammable / corrosive
• increases hardness and scratch resistance, very high abrasion resistance
• Corrosion protection
• Easy to clean

Technical explanations

The aerosol coating meets the following requirements for a layer thickness of 3-5 μm. (The thickness of the layer depends on the application process)

1. Hydrophobization of clean, bright, polished or painted surfaces.
   (The surface should be free of silicone and grease.) Suitable cleaning agents are the Ultima & Neutra ServFaces cleaner)
2. Optimize the surface hardness of the coated substrate.
3. Due to the unique production formula (organic / inorganic components), the coating has the property of “self-healing”. This behavior of the thermoelastic / thermoplastic flow does not exhibit a lacquer system.
4. Due to the high inorganic content, the components can also be successfully sealed, which are subjected to a constant load of up to 1050 ° C.

This list is only a brief description of the services.

Application:

Clean the surface and clean it of dirt. On smooth surfaces, you can apply the product with our applicator. After a short reaction time of about 1-2 minutes, excess product residues can be removed / polished using a microfiber cloth. Aerosol coating is also optimally applicable during the fine spraying process. On rough and absorbent surfaces, the product can be sprayed or rolled up. The ambient temperature should be between + 10 ° C and + 35 ° C for best results. After 120 minutes, the coating is dried with dust.

It takes 6-8 days to fully cure (depending on temperature and humidity). After curing, the coating is resistant to acids, alkalis and solvents (pH 2-13).

Important:

• After treatment, protect the surface for at least 18-24 hours from dirt and moisture.
• Total drying time at room temperature: about 6-8 days.
• a separate drying can reduce the drying time by about 2-3 days.
• Processing temperature: +10 ° C – + 35 ° C
• The humidity of the air should be 30% – 80%
• use: smooth surfaces 3-8 ml / m2 – absorbent / open pores (single-layer coating) 5-7 ml / m²
• During the curing process, the surface must not be subjected to friction!

Product Overview

Aeropaint coating: 250 ml / 500 ml / 1000 ml / 5000 ml
Application: for all exterior surfaces of paint on airplanes (gliders, sport planes, etc.). Also suitable for clean plastic surfaces.

Aerometal coating: 250 ml / 500 ml / 1000 ml / 5000 ml
Application: for all clean and untreated metal surfaces on airplanes (gliders, sport aircraft, etc.).

Aero Window Coating: 250ml / 500ml / 1000ml / 5000ml
Application: for all clean and untreated glass surfaces on airplanes (gliders, sports airplanes, etc.).

Application: 3 to 5 ml / m²
Drying: 18 to 24 hours at + 20 ° C
Operating temperature: + 10 ° C to + 25 ° C
Storage and shelf life: at least 12 months at room temperature in tightly closed original containers.

Protect from direct sunlight and frost
Storage temperature: + 10 ° C to + 25 ° C

During curing, the surface must not be friction-free.

The post Aero Window Coating appeared first on Protectpro.